Carson Car Shops

Southern Pacific Narrow Gauge Freight Car Pack

Includes 3x box cars, 1x tank car, 1x gondola, and a caboose.

Created by Trainboi1 and hosted by Trainz-Forge.

Version: TS 2009 SP2 and later

Nevada County Narrow Gauge flat car nos 1-63 (odd numbers only)

25'4" flatcar used on the NCNG. Carries general goods, 16' logs and lumber products, and cordwood. The first set of cars (1-13; odd)) was built by the Carter Bros. in 1875. 25 additional cars (15-63; odd) were built by the Grass Valley shops from 1876-1899; all to the Carter Bros. plans.

Version: TRS2004

56 lb track

56lb track.
Seasonal; track laid above the snow line set in surveyor will automatically change to the snow version.

Version: TS12

56 lb track, tunnel

56lb track Tunnel version - the texture is darker and the snow version has minimal snow to better simulate being in a tunnel. Seasonal; track laid above the snow line set in surveyor will automatically change to the snow version.

Version: TS12

56 lb track, bridge

56lb bridge track
Seasonal; track laid above the snow line set in surveyor will automatically change to the snow version.

Version: TS12

35 lb track, tan

35lb track with tan ballast and milled ties.
Based on measurements of NCNG track.
Also available in a 30lb version, based on Bodie and Benton track measurements.

Version: TS2009

35 lb track, tan, slightly used

As above, but not as well maintained.
30lb version.

Version: TS2009

35 lb track, tan, unused

As above, but unused / rusty / more overgrown.
30lb version.

30lb version updated Aug 29 2015 to fix a missing mesh issue.

Version: TS2009

35 lb track, no ballast

35lb track with no ballast and milled ties.
Based on measurements of NCNG track.
Also available in a 30lb version, based on Bodie and Benton track measurements.

Version: TS2009

35 lb track, no ballast, slightly used

As above, but not as well maintained.
Also available in a 30lb version.

Version: TS2009

35 lb track, no ballast, unused

As above, but unused / rusty / more overgrown.
Also available in a 30lb version.

Version: TS2009

35 lb track, grey ballast

35lb track with no ballast or ties.
Based on measurements of NCNG track.

Version: TS2009

35 lb track, grey ballast, slightly used

As above, but not as well maintained.

Version: TS2009

35 lb track, grey ballast, unused

As above, but unused / rusty.

Version: TS2009

35 lb track, brown ballast

35lb track with no ballast or ties.
Based on measurements of NCNG track.

Version: TS2009

35 lb track, brown ballast, slightly used

As above, but not as well maintained.

Version: TS2009

35 lb track, brown ballast, unused

As above, but unused / rusty.

Version: TS2009

35 lb track, rails only

35lb track with no ballast or ties.
Based on measurements of NCNG track.
Also available in a 30lb version, based on Bodie and Benton track measurements.

Version: TS2009

35 lb track, rails only, slightly used

As above, but not as well maintained.
Also available in a 30lb version.

Version: TS2009

35 lb track, rails only, unused

As above, but unused / rusty.
Also available in a 30lb version.

Version: TS2009

145' pin-connected truss bridge spline

Modeled after the Virginia & Truckee bridge over the Truckee River in Reno (1896-1950). Not a heavy-duty bridge; this is more at home on branch lines or turn-of-the-century mainlines.

876 polygons.

Version: TRS2004

NG36 8-stall roundhouse and 65' iron turntable

Virginia City roundhouse converted to 3' gauge.

Updated Aug 14, 2009 to fix track alignment issues and add more detail to the turntable.

Version: TRS2004

3' gauge 45' A-frame turntable; six tracks

Based on the Colusa and Lake turntable in Colusa, CA. This table does not include a dighole to allow for more precise positioning. Lower the terrain under the table, or add a third-party dighole separately.

Version: TS12

3' gauge 50' A-frame turntable; one track

Typical A-frame turntable from the 1870s with one outlet track. This table does not include a dighole to allow for more precise positioning. Lower the terrain under the table, or add a third-party dighole separately.

Version: TS12

3' gauge 50' turntable with 5 tracks

based on the Nevada County Narrow Gauge turntable in Grass Valley, CA.

Version: TRS2004

3' gauge 42' turntable with 1 track

based on the Nevada County Narrow Gauge turntable in Nevada City, CA.

Version: TRS2004

SPNG 56ft turntable, 1 track, full pit

Based on turntables used by the Southern Pacific Narrow Gauge railroad. No built-in dighole - either lower the ground under the table in surveyor (then raise the turntable back to ground level), or use a 3rd-party dighole. Matches Lone Pine ground texture.

Version: TRS19 or TRS22 Beta

SPNG 56ft turntable, 1 track, partial pit

Based on turntables used by the Southern Pacific Narrow Gauge railroad. No built-in dighole - either lower the ground under the table in surveyor (then raise the turntable back to ground level), or use a 3rd-party dighole. Matches Lone Pine ground texture.

Version: TRS19 or TRS22 Beta

3' gauge 57' Iron turntable

Modeled after the Virginia City turntable (1896-1938). Suitable for turn-of-the-century short line railroads. Model based on the Auran Content Creation samples and plans published in the September / October 1982 Narrow Gauge and Short Line Gazette.

3 levels of detail; 826 / 594 / 86 polygons

Version: TRS2004

3' gauge 65' Iron turntable; 1 track

Version: TRS2004

3' gauge 65' Iron turntable; 8 tracks

Version: TRS2004

Wood crossing boards

A 20' wood narrow gauge crossing. Non-interactive (does not stop traffic or connect to road splines). Will snap to track for proper placement. This object will match the gradient of the track to which it is attached.

Version: TRS19 or TRS22 Beta