Bodie & Benton Ground Breaking

Feedback, questions, updates on current projects, you name it!
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Once again my PC crashed but now i have a brand new one with 160GB and a very good video card, so work on the B & B will be suspended until further notice, until i can download all the stuff i need to work on it, it may take a couple of weeks hopefully two weeks at the most.
Thanks for the patience so far.
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Work will now resume on the Bodie & Benton, but i will have to start all over again. Here is a link to the forum i made on Auran: http://forums.auran.com/trainz/showthre ... post550868
Thanks for everything :D
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Some work has been started from Bodie to Mono Mills I'm having trouble with the yard layout that i got from the mesuem sent me but i have most of the track work down to the first switchback. Continueing on i have done more research of this route and now i have located a well drawn route from bodie to mono mills and this time the route shall be better.
Thanks Comments are Welcome
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Yes, my first picture on the forums!! This is the picture of the virtual model of Mono Mills.
Yes, my first picture on the forums!! This is the picture of the virtual model of Mono Mills.
mono mill.jpg (136.75 KiB) Viewed 33370 times
Mono Mills on the Bodie & Benton Railroad.
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Some minor texture work has been done, as i'm still waiting for the saw mill from my good friend as of right now im working on my next railroad project the Sweetwater Mountians Narrow Gauge Railroad.
Ethan Stone V&T Man
Posts: 90
Joined: Fri Feb 20, 2009 3:33 pm

Re: Bodie & Benton Ground Breaking

Post by Ethan Stone V&T Man »

Bad News from Trainz, they are going to stop accepting everything for TRS2004 and TRS2006, and might delete everything on the DLS for them, so if you want your content to be on the Trainz you better update everything that you got. And since this is going on i will now have to upload this route from 06' to 09' and everything else to save my route.

Thanks, Comments are welcome.
Craig_ng
Posts: 10
Joined: Wed Jul 13, 2011 3:10 pm

Re: Bodie & Benton Ground Breaking

Post by Craig_ng »

New here and to Trainz.

Sorry to "bump" this one,

I was just up at Bodie this weekend. FYI: The water tower fell down during the winter and is almost rebuilt. The Supervising Ranger also mentioned to me that they're looking at the possibility of a complete restoration of the Depot (subject to labor and funding).

Anyway, has this Bodie/Trainz project had any additional work done on it since last year? I'm beyond quite interested!

Craig_ng
www.pacificng.com
User avatar
Carson & ColoradoFan
Posts: 27
Joined: Wed Jan 19, 2011 6:06 pm

Re: Bodie & Benton Ground Breaking

Post by Carson & ColoradoFan »

I believe that this project is dead, he said a while back.
Curtis, do you still have the DEM map for this route?
Could you send it to me please.
. . . the Railroad that "began
nowhar, ended nowhar, an' stopped
all night to think it over . . ."

Jim Butler
Tonopah, Nevada
Pencil
Site Admin
Posts: 1287
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Bodie & Benton Ground Breaking

Post by Pencil »

Yep, it's still posted here:
http://www.carsoncarshops.com/files/Bodie_Benton_RR.zip
Drag and drop the folder into CM. I can also export it as a .cdp if that would be easier...
As I recall, I didn't export any UTM tiles with this route, but did put a blue stripe on the ground for my best guess as to where the track goes.
User avatar
Carson & ColoradoFan
Posts: 27
Joined: Wed Jan 19, 2011 6:06 pm

Re: Bodie & Benton Ground Breaking

Post by Carson & ColoradoFan »

Thanks Curtis!!
Now I can try my hands on this route! and add it into my Carson & Colorado Route.
How things going on the V&T? Any new content coming out soon?
. . . the Railroad that "began
nowhar, ended nowhar, an' stopped
all night to think it over . . ."

Jim Butler
Tonopah, Nevada
Pencil
Site Admin
Posts: 1287
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Bodie & Benton Ground Breaking

Post by Pencil »

Nothing immediate for the V&T. I'm working on some more of the VC engine yard buildings, and may have a wip screenshot of the original car shops building Soon (TM).

I apologize, since it's been so long since I've done anything with this route, but here's a picture I found:
http://www.carsoncarshops.com/files/bb_route.jpg

This map also includes the proposed extension to Benton.
The Mono Mills model looks like something by Ben Dorsey; I don't know if he ever released it or not...

edit: yes, he did: KUID2:210518:7694:8 on the DLS.

Curtis
User avatar
Carson & ColoradoFan
Posts: 27
Joined: Wed Jan 19, 2011 6:06 pm

Re: Bodie & Benton Ground Breaking

Post by Carson & ColoradoFan »

Curtis,

I have downloaded the route but I can't get it in to TS2010 it says Warning: Unsupported file type for 'C:\Users\Downloads\Bodie_Benton_RR\Bodie_Benton_RR\Bodie_Benton_RR.gnd'
Any Ideas
. . . the Railroad that "began
nowhar, ended nowhar, an' stopped
all night to think it over . . ."

Jim Butler
Tonopah, Nevada
Pencil
Site Admin
Posts: 1287
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Bodie & Benton Ground Breaking

Post by Pencil »

Try extracting all the files into a folder, then drag and drop the folder into CM. I'll also post a .cdp file this evening.
User avatar
Carson & ColoradoFan
Posts: 27
Joined: Wed Jan 19, 2011 6:06 pm

Re: Bodie & Benton Ground Breaking

Post by Carson & ColoradoFan »

Hello Curtis,

I did what you said and it worked! Thank You Sir!
. . . the Railroad that "began
nowhar, ended nowhar, an' stopped
all night to think it over . . ."

Jim Butler
Tonopah, Nevada
Pencil
Site Admin
Posts: 1287
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Bodie & Benton Ground Breaking

Post by Pencil »

Excellent!

Here's a .cdp, just in case anyone else needs it...
http://www.carsoncarshops.com/files/Bodie.cdp
Post Reply